Interfaz para máquinas

1. ID7-D-SEQ 
Sequence Input Module:

Once wired to the molding machine, this module provides the system with machine timing sequences including injection forward, screw run, mold closed, first stage and mold opening.

2. IA1-D-VI 
Analog Input Module:

Analog sensors or equipment can be integrated with the eDART System™. This module accepts a 0-10 VDC signal from these devices and communicates it to the eDART.

3. OR2-D 
Dual Relay Output Module:

For machines and automation equipment that accept digital signals, this device provides a normally open or normally closed contact for process control or 3-way part sorting.

Details

LE-R-30
LE-R-50
Stroke-Velocity Sensors:

Tracking injection velocity, shot volume, cushion, and plasticizing rates is as simple as connecting a Stroke/Velocity sensor. The stroke/velocity sensor is available in various cable lengths for use on a variety of machine sizes.

Details

LS-QTTB-J
LS-QTTB-K
Lynx Quad Temp Thermocouple Sensors:

Connecting these sensors with new and existing thermocouples provides you with insight into the key process variables. Thermocouple sensors give you the ability to track barrel zone, mold, and mold coolant temperatures.

Details

LS-H-¼NPT-3K
Lynx™ Hydraulic Sensor:

The eDART calculates injection pressure and plots it along with other profiles. These curves provide many machine and process variables, displaying hydraulic consistency and repeatability over time.

Details

Lynx™ Cavity Pressure Sensors:

Implementing cavity pressure has never been simpler than with digital cavity pressure sensors. Sensors are automatically recognized by the eDART and identify themselves along with the mold being run.

Details

The LS-DP-100
Lynx Delta Pressure Sensor:

The sensor measures the difference in coolant pressure between the mold inlet and outlet and is designed to be used with the eDART System™. This provides information about the cooling capability and consistency supplied to the molded part.

Details

IA1-S-VI-24
OR2-S
ID7-S-SEQ
OA1-S-V
Lynx Surface Mount Modules:

These can be mounted inside or outside the molding machine or on or within auxiliary equipment. The Analog Input Module interfaces with temperature, dew point, pressure and other remote sensors. The Dual Relay Output Module supplies signals to part diverters, valve gate controllers, machine input cards and other applications.

Details

PZ/LX1-S
LP-LX1-M
SG-LX1-S
Sensor Adapters:

These sensor adapters allow standard piezoelectric and strain gage sensors to be connected to the eDART.

Details

PX/LX4F-S
PZ/LX8F-S
Lynx 4 or 8 Channel Piezo Adapter:

The Lynx Four and Eight Channel Piezo Adapters for Fischer Connectors provide piezoelectric cavity pressure sensor users with a convenient, simple interface to Fischer connector based four and eight channel piezoelectric systems.

Details