Meet Stan, a Process Engineer at 123 Molding Company who is tired of shipping bad parts, working long hours, and missing out on time with his family. See how CoPilot and The Hub helped Stan improve operational efficiency, lower costs, and alleviate unnecessary stress… so that when he’s home, he’s home.

 

Learning how to read and document pressure in the injection molding process is very beneficial in troubleshooting and documenting the process. However, not all pressure is equal—you have to look at pressures in different locations differently. Here’s an overview of the three types of pressure: hydraulic, specific, and cavity.

Setting up the ID-7 module correctly is vital to ensure proper data collection. Marty Key walks through the features of the module and how to set it up with the eDART® system.

Subscribe to our YouTube channel for more videos!

This video offers a brief tutorial on how to start a job in eDART system. The eDART is a process monitoring and control software for plastic injection molding applications.

Improper nozzle tip sizing can lead to leaks and damage to the machine. Here’s a walk-through of how to ensure you have the proper sized nozzle tip for your mold.

Unfortunately, the injection molding world is not very standardized when it comes to terminology on various machines. Navigating the different terms can be a challenge, so let’s walk through a few of these terms, what they mean, and how they appear across multiple injection molding machines… Jeopardy style!

Flash is one of the most common defects in the injection molding industry. There is a lot of misinformation on the cause of the flash. This video from RJG® addresses one of the leading reasons for flash and discusses ways to troubleshoot and identify the causes.

Learn the basics of how to set up mold protect on an injection molding machine in order to protect the mold.