Tip of the Day 122: Set Screw Bottom to Get Cushion

Recently a customer asked if the eDART could compute the cushion. It can. But there is a manual procedure required that is sometimes forgotten. It looks like this: Start the job on the eDART before purging the machine. Sometime during the purge sequence pause while...

Tip of the Day 121: If you get a shock, STOP!

One of our consultants was in Malaysia last week. While hooking up his Lynx cable to an eDART he got a shock or at least a tingle from the eDART. He was holding the Lynx cable in one hand and the eDART was plugged in and perched on a table.There are many explanations...

Tip of the Day 111: Splitting eDART Port Load for Speed

In tip # 110 you probably noticed that the eDARTreaction time depends on the sample rate of all the sensors attached to the Lynx port. We recommend that you split the sensor load between the two Lynx ports on the eDART in order to get the fastest reaction time...

Tip of the Day 98: Auto-Starting Jobs

A reader of tip # 97 noticed that I mentioned “auto-start” and wanted to know more about it. Here goes…PhilosophyThe initial idea behind the eDART™ was to remove user interaction with the eDART from the untrained user as much as possible. This is why...